前言：本次部署采用系统的是Centos 8-Stream版，存储库为OpenStack-Victoria版，除基础配置，五大服务中的时间同步服务，七大组件中的nova服务，neutron服务，cinder服务需要在双节点配置外，其他服务配置均在控制节点，neutron配置从公有网络和私有网络中选择一种即可，大多数情况还是选公有网络的配置，此次部署所有密码均为111111，可按自身需要自行配置
安装环境：
- 采用虚拟化软件：VMware Workstation 16 Pro
- 操作系统：Centos 8-Stream
- 控制节点配置：内存4G，CPU4核，磁盘100G，启用虚拟化引擎
- 计算节点配置：内存4G，CPU4核，磁盘100G，启用虚拟化引擎
基础配置(双节点)
Yum源仓库配置
阿里云镜像仓库地址：https://mirrors.aliyun.com，有需要可自行配置，但是这里用不到
（1） 配置Centos 8的源只需改yum仓库.repo文件参数即可如下
#更改CentOS-Stream-AppStream.repo文件，将baseurl参数中的地址改为https://mirrors.aliyun.com [root@localhost ~]# cd /etc/yum.repos.d/ [root@localhost yum.repos.d]# vi CentOS-Stream-AppStream.repo [appstream] name=CentOS Stream $releasever - AppStream #mirrorlist=http://mirrorlist.centos.org/? release=$stream&arch=$basearch&repo=AppStream&infra=$infra baseurl=https://mirrors.aliyun.com/$contentdir/$stream/AppStream/$basearch/os/ gpgcheck=1 enabled=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial #更改CentOS-Stream-BaseOS.repo 文件，将baseurl参数中的地址改为https://mirrors.aliyun.com [root@localhost yum.repos.d]# vi CentOS-Stream-BaseOS.repo [baseos] name=CentOS Stream $releasever - BaseOS #mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=BaseOS&infra=$infra baseurl=https://mirrors.aliyun.com/$contentdir/$stream/BaseOS/$basearch/os/ gpgcheck=1 enabled=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial #更改CentOS-Stream-Extras.repo 文件，将baseurl参数中的地址改为https://mirrors.aliyun.com [root@localhost yum.repos.d]# vi CentOS-Stream-Extras.repo [extras] name=CentOS Stream $releasever - Extras #mirrorlist=http://mirrorlist.centos.org/?release=$stream&arch=$basearch&repo=extras&infra=$infra baseurl=https://mirrors.aliyun.com/$contentdir/$stream/extras/$basearch/os/ gpgcheck=1 enabled=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial （2）配置openstack源
#在yum仓库文件夹下面创建openstack-victoria.repo文件 [root@localhost ~]# vi /etc/yum.repos.d/openstack-victoria.repo #写入以下内容 [virctoria] name=virctoria baseurl=https://mirrors.aliyun.com/centos/8-stream/cloud/x86_64/openstack-victoria/ gpgcheck=0 enabled=1 （3）清除缓存，重建缓存
[root@controller ~]# yum clean all [root@controller ~]# yum makecache 网络配置
- 控制节点双网卡-------> 仅主机IP：10.10.10.10 Net外网IP：10.10.20.10
- 计算节点双网卡-------> 仅主机IP：10.10.10.20 Net外网IP：10.10.20.20
（1）安装network网络服务
#安装network，由于8系统自带的服务为NetworkManager,它会与neutron服务有冲突，所以安装network，关闭NetworkManager,并设置disable状态 [root@localhost ~]# dnf -y install network-scripts [root@localhost ~]# systemctl disable --now NetManager #启动network服务，设为开机自启动 [root@localhost ~]# systemctl enable --now network （2） 配置静态IP
#ens33，以控制节点为例 [root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens33 BOOTPROTO=static #修改 ONBOOT=yes #修改 IPADDR=10.10.10.10 #添加 NETMASK=255.255.255.0 #添加 #ens34，以控制节点为例 [root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-ens34 BOOTPROTO=static #修改 ONBOOT=yes #修改 IPADDR=10.10.20.10 #添加 NETMASK=255.255.255.0 #添加 GATEWAY=10.10.20.2 #添加 DNS1=8.8.8.8 #添加 DNS2=114.114.114.114 #添加 （3）重启网络，测试外网连通性
[root@localhost ~]# systemctl restart network [root@localhost ~]# ping -c 3 www.baidu.com 主机配置
（1）修改主机名
#控制节点 [root@localhost ~]# hostnamectl set-hostname controller [root@localhost ~]# bash [root@controller ~]# #计算节点 [root@localhost ~]# hostnamectl set-hostname compute [root@localhost ~]# bash [root@compute ~]# （2）关闭防火墙
#关防火墙并设置disable开机禁启动 [root@controller ~]# systemctl disable --now firewalld （3）关闭selinux安全子系统
#设置selinux并设置disable开机禁启动 [root@controller ~]# vi /etc/selinux/config SELINUX=disabled #可通过getenforce命令查看selinux状态 [root@controller ~]# getenforce Disabled （4）配置host主机映射
#控制节点 [root@controller ~]# cat >>etc/hosts<<EOF > 10.10.10.10 controller > 10.10.10.20 computer > EOF #计算节点 [root@compute ~]# cat >>etc/hosts<<EOF > 10.10.10.10 controller > 10.10.10.20 compute > EOF openstack存储库
#安装openstack-victoria版存储库 [root@controller ~]# dnf -y install centos-release-openstack-victoria #升级节点上所有的安装包 [root@controller ~]# dnf -y upgrade #安装openstack客户端和openstack-selinux [root@controller ~]# dnf -y install python3-openstackclient openstack-selinux 五大服务
Chrony时间同步（双节点）
（1）查看系统是否安装chrony
[root@controller ~]# rpm -qa |grep chrony #没有的话就安装 [root@controller ~]# dnf -y install chrony （2）编辑chrony配置文件
#控制节点 [root@controller ~]# vim /etc/chrony.conf server ntp6.aliyun.com iburst #添加与阿里云时间同步 allow 10.10.10.0/24 #添加 #计算节点 [root@controller ~]# vim /etc/chrony.conf server controller iburst #添加与控制节点时间同步 （3）重启时间同步服务，设置开机自启
[root@controller ~]# systemctl restart chronyd && systemctl enable chronyd Mariadb数据库
（1）安装mariadb数据库
[root@controller ~]# dnf -y install mariadb mariadb-server python3-PyMySQL #启动mariadb数据库 [root@controller ~]# systemctl start mariadb （2）创建openstack.cnf文件，编辑它
[root@controller ~]# vim /etc/my.cnf.d/openstack.cnf [mysqld] bind-address = 10.10.10.10 #绑定IP，如果后面换IP，这行可以删掉 default-storage-engine = innodb innodb_file_per_table = on max_connections = 4096 collation-server = utf8_general_ci character-set-server = utf8 （3）初始化数据库
[root@controller ~]# mysql_secure_installation Enter current password for root (enter for none): #输入当前用户root密码，若为空直接回车 OK, successfully used password, moving on... Set root password? [Y/n] y # 是否设置root密码 New password: # 输入新密码 Re-enter new password: # 再次输入新密码 Remove anonymous users? [Y/n] y # 是否删除匿名用户 Disallow root login remotely? [Y/n] n # 是否禁用远程登录 Remove test database and access to it? [Y/n] y # 是否删除数据库并访问它 Reload privilege tables now? [Y/n] y # 是否重新加载权限表 （4）重启数据库服务并设置开机自启
[root@controller ~]# systemctl restart mariadb && systemctl enable mariadb RabbitMQ消息队列
注意：安装rabbitmq-server时，可能会报错，这是安装源里面没有libSDL，下载所需包，再安装rabbitmq-server就行了
下载命令：wget http://rpmfind.net/linux/centos/8-stream/PowerTools/x86_64/os/Packages/SDL2-2.0.10-2.el8.x86_64.rpm
安装命令：dnf -y install SDL2-2.0.10-2.el8.x86_64.rpm
（1）安装rabbitmq软件包
[root@controller ~]# dnf -y install rabbitmq-server （2）启动消息队列服务并设置开机自启动
[root@controller ~]# systemctl start rabbitmq-server && systemctl enable rabbitmq-server (3) 添加openstack用户并设置密码
[root@controller ~]# rabbitmqctl add_user openstack 111111 (4) 配置openstack用户权限
[root@controller ~]# rabbitmqctl set_permissions openstack ".*" ".*" ".*" （5）启用消息队列Web界面管理插件
[root@controller ~]# rabbitmq-plugins enable rabbitmq_management #这一步启动后，ss -antlu命令查看端口会有一个15672的端口开启，可通过web界面登录RabbitMQ查看，网站地址：http://10.10.10.10:15672，用户和密码默认都是guest Memcached缓存
（1）安装memcache软件包
[root@controller ~]# dnf -y install memcached python3-memcached （2）编辑memcache配置文件
[root@controller ~]# vim /etc/sysconfig/memcached .......... OPTIONS="-l 127.0.0.1,::1,controller" #修改这一行 （3）重启缓存服务并设置开机自启
[root@controller ~]# systemctl start memcached && systemctl enable memcached Etcd集群
（1）安装etcd软件包
[root@controller ~]# dnf -y install etcd （2）编辑etcd配置文件
[root@controller ~]# vim /etc/etcd/etcd.conf #修改如下 ETCD_DATA_DIR="/var/lib/etcd/default.etcd" ETCD_LISTEN_PEER_URLS="http://10.10.10.10:2380" ETCD_LISTEN_CLIENT_URLS="http://10.10.10.10:2379" ETCD_NAME="controller" ETCD_INITIAL_ADVERTISE_PEER_URLS="http://10.10.10.10:2380" ETCD_ADVERTISE_CLIENT_URLS="http://10.10.10.10:2379" ETCD_INITIAL_CLUSTER="controller=http://10.10.10.10:2380" ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster" ETCD_INITIAL_CLUSTER_STATE="new" （3）启动etcd服务并设置开机自启动
[root@controller ~]# systemctl start etcd && systemctl enable etcd 七大组件
Keystone认证
（1）数据库创库授权
#进入数据库 [root@controller ~]# mysql -u root -p111111 #创建keystone数据库 MariaDB [(none)]> CREATE DATABASE keystone; #授权 MariaDB [(none)]> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'localhost' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'%' IDENTIFIED BY '111111'; （2）安装keystone软件包
[root@controller ~]# dnf -y install openstack-keystone httpd python3-mod_wsgi （3）编辑配置文件
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/keystone/keystone.conf /etc/keystone/keystone.conf.bak [root@controller ~]# grep -Ev '^$|#' /etc/keystone/keystone.conf.bak >/etc/keystone/keystone.conf #编辑 [root@controller ~]# vim /etc/keystone/keystone.conf [database] connection = mysql+pymysql://keystone:111111@controller/keystone [token] provider = fernet （4）数据库初始化
[root@controller ~]# su -s /bin/sh -c "keystone-manage db_sync" keystone （5）查看keystone数据库表信息
[root@controller ~]# mysql -uroot -p111111 MariaDB [(none)]> use keystone; MariaDB [keystone]> show tables; MariaDB [keystone]> quit （6）初始化Fernet
[root@controller ~]# keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone [root@controller ~]# keystone-manage credential_setup --keystone-user keystone --keystone-group keystone （7）引导身份认证
[root@controller ~]# keystone-manage bootstrap --bootstrap-password 111111 --bootstrap-admin-url http://controller:5000/v3/ --bootstrap-internal-url http://controller:5000/v3/ --bootstrap-public-url http://controller:5000/v3/ --bootstrap-region-id RegionOne （8）配置Apache HTTP服务
#编辑httpd.conf文件 [root@controller ~]# vim /etc/httpd/conf/httpd.conf ServerName controller #添加这一行 <Directory /> AllowOverride none Require all granted #这一行改成这样 </Directory> #创建wsgi-keystone.conf文件链接 [root@controller ~]# ln -s /usr/share/keystone/wsgi-keystone.conf /etc/httpd/conf.d/ （9）重启httpd服务并设置开机自启动
[root@controller ~]# systemctl restart httpd && systemctl enable httpd （10）创建admin环境变量脚本
[root@controller ~]# vim /admin-openrc.sh export OS_USERNAME=admin export OS_PASSWORD=111111 export OS_PROJECT_NAME=admin export OS_USER_DOMAIN_NAME=Default export OS_PROJECT_DOMAIN_NAME=Default export OS_AUTH_URL=http://controller:5000/v3 export OS_IDENTITY_API_VERSION=3 export OS_IMAGE_API_VERSION=2 #可通过source /admin-openrc.sh命令来导入环境变量，或./admin-openrc.sh命令，如果不想每次手动导入，可以修改.bashrc配置文件实现开机启动导入 [root@controller ~]# vim .bashrc source /admin-openrc.sh #添加这一行 （11）创建域，项目，用户和角色
#创建域，已有默认域default，自己可随便创一个 [root@controller ~]# openstack domain create --description "An Example Domain" example #创建service项目 [root@controller ~]# openstack project create --domain default --description "Service Project" service #创建测试项目 [root@controller ~]# openstack project create --domain default --description "Demo Project" myproject #创建用户，此命令执行会要求输入密码，输两次即可 [root@controller ~]# openstack user create --domain default --password-prompt myuser #创建角色 [root@controller ~]# openstack role create myrole #添加角色与项目，用户绑定 [root@controller ~]# openstack role add --project myproject --user myuser myrole （12）验证token令牌
[root@controller ~]# openstack token issue Glance镜像
(1) 数据库创库授权
#进入数据库 [root@controller ~]# mysql -u root -p111111 #创建glance数据库 MariaDB [(none)]> CREATE DATABASE glance; #授权 MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' IDENTIFIED BY '111111'; (2) 安装glance软件包
注：安装报错，修改CentOS-Stream-PowerTools.repo源为enable=1，重新安装
[root@controller ~]# dnf install -y openstack-glance (3) 编辑配置文件
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/glance/glance-api.conf /etc/glance/glance-api.conf.bak [root@controller ~]# grep -Ev '^$|#' /etc/glance/glance-api.conf.bak >/etc/glance/glance-api.conf #编辑 [root@controller ~]# vim /etc/glance/glance-api.conf [database] connection = mysql+pymysql://glance:111111@controller/glance [keystone_authtoken] www_authenticate_uri = http://controller:5000 auth_url = http://controller:5000 memcached_servers = controller:11211 auth_type = password project_domain_name = Default user_domain_name = Default project_name = service username = glance password = 111111 [paste_deploy] flavor = keystone [glance_store] stores = file,http default_store = file filesystem_store_datadir = /var/lib/glance/images/ (4) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "glance-manage db_sync" glance (5) 查看glance数据库表信息
[root@controller ~]# mysql -uroot -p111111 MariaDB [(none)]> use glance; MariaDB [keystone]> show tables; MariaDB [keystone]> quit (6) 创建glance用户和服务，关联admin角色
#创建glance用户 [root@controller ~]# openstack user create --domain default --password 111111 glance #关联admin角色 [root@controller ~]# openstack role add --project service --user glance admin #创建glance服务 [root@controller ~]# openstack service create --name glance --description "OpenStack Image" image (7) 注册API接口
#public [root@controller ~]# openstack endpoint create --region RegionOne image public http://controller:9292 #internal [root@controller ~]# openstack endpoint create --region RegionOne image internal http://controller:9292 #admin [root@controller ~]# openstack endpoint create --region RegionOne image admin http://controller:9292 (8) 查看服务端点
[root@controller ~]# openstack endpoint list (9) 启动glance服务并设置开机自启
[root@controller ~]# systemctl start openstack-glance-api && systemctl enable openstack-glance-api (10) 测试镜像功能
#此次采用的镜像为cirros-0.5.1-x86_64-disk.img,创建命令如下 [root@controller ~]# openstack image create "cirros" --file cirros-0.5.1-x86_64-disk.img --disk-format qcow2 --container-format bare --public #创建成功后可通过openstack命令查看 [root@controller ~]# openstack image list #进入glance数据库查看，存放在images表中 [root@controller ~]# mysql -uroot -p111111 MariaDB [(none)]> use glance; MariaDB [glance]> select * from imagesG; #在/var/lib/glance/images/目录下可以看到镜像文件，如果要删除此镜像需要删除数据库信息，再删除镜像文件 [root@controller ~]# ls /var/lib/glance/images/ Placement放置
(1) 数据库创库授权
#进入数据库 [root@controller ~]# mysql -u root -p111111 #创建placement数据库 MariaDB [(none)]> CREATE DATABASE placement; #授权 MariaDB [(none)]> GRANT ALL PRIVILEGES ON placement.* TO 'placement'@'localhost' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON placement.* TO 'placement'@'%' IDENTIFIED BY '111111'; (2) 安装placement软件包
[root@controller ~]# dnf install -y openstack-placement-api (3) 编辑配置文件
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/placement/placement.conf /etc/placement/placement.conf.bak [root@controller ~]# grep -Ev '^$|#' /etc/placement/placement.conf.bak >/etc/placement/placement.conf #编辑 [root@controller ~]# vim /etc/placement/placement.conf [placement_database] connection = mysql+pymysql://placement:111111@controller/placement [api] auth_strategy = keystone [keystone_authtoken] auth_url = http://controller:5000/v3 memcached_servers = controller:11211 auth_type = password project_domain_name = Default user_domain_name = Default project_name = service username = placement password = 111111 (4) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "placement-manage db sync" placement (5) 查看placement数据库表信息
[root@controller ~]# mysql -uroot -p111111 MariaDB [(none)]> use placement; MariaDB [keystone]> show tables; MariaDB [keystone]> quit (6) 创建placement用户和服务，关联admin角色
#创建placement用户 [root@controller ~]# openstack user create --domain default --password 111111 placement #关联admin角色 [root@controller ~]# openstack role add --project service --user placement admin #创建placement服务 [root@controller ~]# openstack service create --name placement --description "Placement API" placement (7) 注册API接口
#public [root@controller ~]# openstack endpoint create --region RegionOne placement internal http://controller:8778 #internal [root@controller ~]# openstack endpoint create --region RegionOne placement public http://controller:8778 #admin [root@controller ~]# openstack endpoint create --region RegionOne placement admin http://controller:8778 (8) 查看服务端点
[root@controller ~]# openstack endpoint list (9) 重启httpd服务
[root@controller ~]# systemctl restart httpd 检测placement服务状态
[root@controller ~]# placement-status upgrade check Nova计算
1,控制节点(1)
(1) 数据库创库授权
#进入数据库 [root@controller ~]# mysql -u root -p111111 #创建nova_api，nova和nova_cell0数据库 MariaDB [(none)]> CREATE DATABASE nova_api; MariaDB [(none)]> CREATE DATABASE nova; MariaDB [(none)]> CREATE DATABASE nova_cell0; #授权 MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'localhost' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_api.* TO 'nova'@'%' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'localhost' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova.* TO 'nova'@'%' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'localhost' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'%' IDENTIFIED BY '111111'; (2) 安装nova软件包
[root@controller ~]# dnf install -y openstack-nova-api openstack-nova-conductor openstack-nova-novncproxy openstack-nova-scheduler (3) 编辑配置文件
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/nova/nova.conf /etc/nova/nova.conf.bak [root@controller ~]# grep -Ev '^$|#' /etc/nova/nova.conf.bak >/etc/nova/nova.conf #编辑 [root@controller ~]# vim /etc/nova/nova.conf [DEFAULT] enabled_apis = osapi_compute,metadata transport_url = rabbit://openstack:111111@controller:5672/ my_ip = 10.10.10.10 #本机IP，如果将来换IP，这地方一定要改 [api_database] connection = mysql+pymysql://nova:111111@controller/nova_api [database] connection = mysql+pymysql://nova:111111@controller/nova [api] auth_strategy = keystone [keystone_authtoken] www_authenticate_uri = http://controller:5000/ auth_url = http://controller:5000/ memcached_servers = controller:11211 auth_type = password project_domain_name = Default user_domain_name = Default project_name = service username = nova password = 111111 [vnc] enabled = true server_listen = $my_ip server_proxyclient_address = $my_ip [glance] api_servers = http://controller:9292 [oslo_concurrency] lock_path = /var/lib/nova/tmp [placement] region_name = RegionOne project_domain_name = Default project_name = service auth_type = password user_domain_name = Default auth_url = http://controller:5000/v3 username = placement password = 111111 (4) 数据库初始化
# 同步nova_api数据库 [root@controller ~]# su -s /bin/sh -c "nova-manage api_db sync" nova # 同步nova_cell0数据库 [root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 map_cell0" nova # 创建cell1 [root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 create_cell --name=cell1 --verbose" nova # 同步nova数据库 [root@controller ~]# su -s /bin/sh -c "nova-manage db sync" nova (5) 创建nova用户和服务，关联admin角色
#创建nova用户 [root@controller ~]# openstack user create --domain default --password 111111 nova #关联admin角色 [root@controller ~]# openstack role add --project service --user nova admin #创建nova服务 [root@controller ~]# openstack service create --name nova --description "OpenStack Compute" compute (6) 注册API接口
#public [root@controller ~]# openstack endpoint create --region RegionOne compute public http://controller:8774/v2.1 #internal [root@controller ~]# openstack endpoint create --region RegionOne compute internal http://controller:8774/v2.1 #admin [root@controller ~]# openstack endpoint create --region RegionOne compute admin http://controller:8774/v2.1 (7) 查看服务端点
[root@controller ~]# openstack endpoint list (8) 验证nova_cell0和cell1是否添加成功
[root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 list_cells" nova (9) 启动nova所有服务并设为开机自启
[root@controller ~]# systemctl enable --now openstack-nova-api openstack-nova-scheduler openstack-nova-conductor openstack-nova-novncproxy (10) 查看nova服务是否启动
[root@controller ~]# nova service-list #一般只会显示两个服务：nova-scheduler和nova-conductor，这是因为上面这条命令是由nova-api接收，而它控制着nova-scheduler和nova-conductor服务，如果nova-api未开启，那这两个服务也会down掉，nova-novncproxy服务则是通过查看端口号的形式，示例如下： [root@controller ~]# netstat -lntup | grep 6080 tcp 0 0 0.0.0.0:6080 0.0.0.0:* LISTEN 1456/python3 [root@controller ~]# ps -ef | grep 1456 nova 1456 1 0 18:29 ? 00:00:05 /usr/bin/python3 /usr/bin/nova-novncproxy --web /usr/share/novnc/ root 27724 26054 0 20:51 pts/0 00:00:00 grep --color=auto 1456 (11) 如何通过web界面查看
#如果不配置域名解析，就直接用ip http://10.10.10.10:6080 #如果要配置域名解析，在电脑C:WindowsSystem32driversetc目录下里面的hosts文件里添加 10.10.10.10 controller 10.10.10.20 compute #再访问 http://controller:6080 2,计算节点
(1) 安装nova软件包
[root@compute ~]# dnf install -y openstack-nova-compute (2) 编辑配置文件
#复制备份配置文件并去掉注释 [root@compute ~]# cp /etc/nova/nova.conf /etc/nova/nova.conf.bak [root@compute ~]# grep -Ev '^$|#' /etc/nova/nova.conf.bak >/etc/nova/nova.conf #编辑 [root@compute ~]# vim /etc/nova/nova.conf [DEFAULT] enabled_apis = osapi_compute,metadata transport_url = rabbit://openstack:111111@controller my_ip = 10.10.10.20 #本机IP，如果将来换IP，这地方一定要改 [api] auth_strategy = keystone [keystone_authtoken] www_authenticate_uri = http://controller:5000/ auth_url = http://controller:5000/ memcached_servers = controller:11211 auth_type = password project_domain_name = Default user_domain_name = Default project_name = service username = nova password = 111111 [vnc] enabled = true server_listen = 0.0.0.0 server_proxyclient_address = $my_ip novncproxy_base_url = http://controller:6080/vnc_auto.html [glance] api_servers = http://controller:9292 [oslo_concurrency] lock_path = /var/lib/nova/tmp [placement] region_name = RegionOne project_domain_name = Default project_name = service auth_type = password user_domain_name = Default auth_url = http://controller:5000/v3 username = placement password = 111111 (3) 确定计算节点是否支持虚拟机的硬件加速
#如果此命令返回值是别的数字，计算节点支持硬件加速；如果此命令返回值是0，计算节点不支持硬件加速，需要配置[libvirt] [root@compute ~]# egrep -c '(vmx|svm)' /proc/cpuinfo #配置[libvirt] [root@compute ~]# vim /etc/nova/nova.conf [libvirt] virt_type = qemu (4) 启动计算节点nova服务并设置开机自启动
[root@compute ~]# systemctl enable --now libvirtd.service openstack-nova-compute.service 控制节点（2）
(5) 将计算节点添加到单元数据库
#确认数据库中存在计算主机 [root@controller ~]# openstack compute service list --service nova-compute #控制节点发现计算节点 [root@controller ~]# su -s /bin/sh -c "nova-manage cell_v2 discover_hosts --verbose" nova (6) 设置发现间隔
[root@controller ~]# vim /etc/nova/nova.conf [scheduler] discover_hosts_in_cells_interval = 300 Neutron网络
(1) 数据库创库授权
#进入数据库 [root@controller ~]# mysql -u root -p111111 #创建neutron数据库 MariaDB [(none)] CREATE DATABASE neutron; #授权 MariaDB [(none)]> GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'localhost' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON neutron.* TO 'neutron'@'%' IDENTIFIED BY '111111'; (2) 创建neutron用户和服务，关联admin角色
#创建neutron用户 [root@controller ~]# openstack user create --domain default --password 111111 neutron #关联admin角色 [root@controller ~]# openstack role add --project service --user neutron admin #创建neutron服务 [root@controller ~]# openstack service create --name neutron --description "OpenStack Networking" network (3) 注册API接口
#public [root@controller ~]# openstack endpoint create --region RegionOne network public http://controller:9696 #internal [root@controller ~]# openstack endpoint create --region RegionOne network internal http://controller:9696 #admin [root@controller ~]# openstack endpoint create --region RegionOne network admin http://controller:9696 (4) 查看服务端点
[root@controller ~]# openstack endpoint list 控制节点公有网络
(1) 安装neutron软件包
[root@controller ~]# dnf -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-linuxbridge ebtables (2) 编辑neutron配置文件
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf #编辑 [root@controller ~]# vim /etc/neutron/neutron.conf [DEFAULT] core_plugin = ml2 service_plugins = transport_url = rabbit://openstack:111111@controller auth_strategy = keystone notify_nova_on_port_status_changes = true notify_nova_on_port_data_changes = true [database] connection = mysql+pymysql://neutron:111111@controller/neutron [keystone_authtoken] www_authenticate_uri = http://controller:5000 auth_url = http://controller:5000 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = 111111 [nova] #如果配置文件没有这个参数，就直接加 auth_url = http://controller:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = nova password = 111111 [oslo_concurrency] lock_path = /var/lib/neutron/tmp (3) 编辑ml2插件
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugins/ml2/ml2_conf.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/ml2_conf.ini.bak >/etc/neutron/plugins/ml2/ml2_conf.ini #编辑 [root@controller ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini [ml2] type_drivers = flat,vlan tenant_network_types = mechanism_drivers = linuxbridge extension_drivers = port_security [ml2_type_flat] flat_networks = provider [securitygroup] enable_ipset = true (4) 配置Linux网桥代理
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini [linux_bridge] physical_interface_mappings = provider:ens34 #这里选择提供给实例的net网卡 [vxlan] enable_vxlan = false [securitygroup] enable_security_group = true firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver (5) 配置DHCP代理
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/dhcp_agent.ini /etc/neutron/dhcp_agent.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/dhcp_agent.ini.bak >/etc/neutron/dhcp_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/dhcp_agent.ini [DEFAULT] interface_driver = linuxbridge dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq enable_isolated_metadata = true (6) 设置网桥过滤器
#修改系统参数配置文件 [root@controller ~]# echo 'net.bridge.bridge-nf-call-iptables = 1 net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf #加载br_netfilter模块 [root@controller ~]# modprobe br_netfilter #检查 [root@controller ~]# sysctl -p net.bridge.bridge-nf-call-iptables = 1 #出现这个则配置成功 net.bridge.bridge-nf-call-ip6tables = 1 #出现这个则配置成功 (7) 配置元数据代理
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/metadata_agent.ini /etc/neutron/metadata_agent.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/metadata_agent.ini.bak >/etc/neutron/metadata_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/metadata_agent.ini [DEFAULT] nova_metadata_host = controller metadata_proxy_shared_secret = METADATA_SECRET #'METADATA_SECRET'为密码，可自行定义。但要与后面配置nova中的元数据参数一致 (8) 配置计算服务以使用网络服务
#在[neutron]部分，配置访问参数，启用元数据代理 [root@controller ~]# vim /etc/nova/nova.conf [neutron] auth_url = http://controller:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = 111111 service_metadata_proxy = true metadata_proxy_shared_secret = METADATA_SECRET #密码要一致 (9) 创建网络服务初始化脚本链接
[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini (10) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron (11) 重启nova的API服务
[root@controller ~]# systemctl restart openstack-nova-api.service (12) 启动neutron服务并设置开机自启
[root@controller ~]# systemctl enable --now neutron-server.service neutron-linuxbridge-agent.service neutron-dhcp-agent.service neutron-metadata-agent.service 计算节点公有网络
(1) 安装neutron软件包
[root@compute ~]# dnf install -y openstack-neutron-linuxbridge ebtables ipset (2) 编辑neutron配置文件
#复制备份配置文件并去掉注释 [root@compute ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak [root@compute ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf #编辑 [root@compute ~]# vim /etc/neutron/neutron.conf [DEFAULT] transport_url = rabbit://openstack:111111@controller auth_strategy = keystone [keystone_authtoken] www_authenticate_uri = http://controller:5000 auth_url = http://controller:5000 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = 111111 [oslo_concurrency] lock_path = /var/lib/neutron/tmp (3) 配置Linux网桥代理
#复制备份配置文件并去掉注释 [root@compute ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak [root@compute ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini [linux_bridge] physical_interface_mappings = provider:ens34 #这里选择提供给实例的net网卡 [vxlan] enable_vxlan = false [securitygroup] enable_security_group = true firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver (4) 设置网桥过滤器
#修改系统参数配置文件 [root@compute ~]# echo 'net.bridge.bridge-nf-call-iptables = 1 net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf #加载br_netfilter模块 [root@compute ~]# modprobe br_netfilter #检查 [root@compute ~]# sysctl -p net.bridge.bridge-nf-call-iptables = 1 #出现这个则配置成功 net.bridge.bridge-nf-call-ip6tables = 1 #出现这个则配置成功 (5) 配置计算服务以使用网络服务
#在[neutron]部分，配置访问参数，启用元数据代理 [root@compute ~]# vim /etc/nova/nova.conf [neutron] auth_url = http://controller:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = 111111 (6) 重启nova的API服务
[root@compute ~]# systemctl restart openstack-nova-api.service (7) 启动Linux网桥服务并设置开机自启
[root@compute ~]# systemctl enable neutron-linuxbridge-agent.service 公有网络服务是否正常运行
(8) 控制节点查看网络代理服务列表
#控制节点查看网络代理服务列表 [root@controller ~]# openstack network agent list #一般成功后会出现Metadata agent，DHCP agent,两个Linux bridge agent一共四个代理，一个Linux bridge agent属于controlller,另一个属于compute 控制节点私有网络
(1) 安装neutron软件包
[root@controller ~]# dnf -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-linuxbridge ebtables (2) 编辑neutron配置文件
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf #编辑 [root@controller ~]# vim /etc/neutron/neutron.conf [DEFAULT] core_plugin = ml2 service_plugins = router allow_overlapping_ips = true transport_url = rabbit://openstack:111111@controller auth_strategy = keystone notify_nova_on_port_status_changes = true notify_nova_on_port_data_changes = true [database] connection = mysql+pymysql://neutron:111111@controller/neutron [keystone_authtoken] www_authenticate_uri = http://controller:5000 auth_url = http://controller:5000 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = 111111 [nova] #如果配置文件没有这个参数，就直接加 auth_url = http://controller:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = nova password = 111111 [oslo_concurrency] lock_path = /var/lib/neutron/tmp (3) 编辑ml2插件
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugins/ml2/ml2_conf.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/ml2_conf.ini.bak >/etc/neutron/plugins/ml2/ml2_conf.ini #编辑 [root@controller ~]# vim /etc/neutron/plugins/ml2/ml2_conf.ini [ml2] type_drivers = flat,vlan,vxlan tenant_network_types = vxlan mechanism_drivers = linuxbridge,l2population extension_drivers = port_security [ml2_type_flat] flat_networks = provider [ml2_type_vxlan] vni_ranges = 1:1000 [securitygroup] enable_ipset = true (4) 配置Linux网桥代理
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini [linux_bridge] physical_interface_mappings = provider:ens34 #这里选择提供给实例的net网卡 [vxlan] enable_vxlan = true local_ip = 10.10.10.10 l2_population = true [securitygroup] enable_security_group = true firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver (5) 设置网桥过滤器
#修改系统参数配置文件 [root@controller ~]# echo 'net.bridge.bridge-nf-call-iptables = 1 net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf #加载br_netfilter模块 [root@controller ~]# modprobe br_netfilter #检查 [root@controller ~]# sysctl -p net.bridge.bridge-nf-call-iptables = 1 #出现这个则配置成功 net.bridge.bridge-nf-call-ip6tables = 1 #出现这个则配置成功 (6) 配置DHCP代理
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/dhcp_agent.ini /etc/neutron/dhcp_agent.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/dhcp_agent.ini.bak >/etc/neutron/dhcp_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/dhcp_agent.ini [DEFAULT] interface_driver = linuxbridge dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq enable_isolated_metadata = true (7) 配置第三层代理
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/l3_agent.ini /etc/neutron/l3_agent.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/l3_agent.ini.bak > /etc/neutron/l3_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/l3_agent.ini [DEFAULT] interface_driver = linuxbridge (8) 配置元数据代理
#复制备份配置文件并去掉注释 [root@controller ~]# cp /etc/neutron/metadata_agent.ini /etc/neutron/metadata_agent.ini.bak [root@controller ~]# grep -Ev '^$|#' /etc/neutron/metadata_agent.ini.bak >/etc/neutron/metadata_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/metadata_agent.ini [DEFAULT] nova_metadata_host = controller metadata_proxy_shared_secret = METADATA_SECRET #'METADATA_SECRET'为密码，可自行定义。但要与后面配置nova中的元数据参数一致 (9) 配置计算服务以使用网络服务
#在[neutron]部分，配置访问参数，启用元数据代理 [root@controller ~]# vim /etc/nova/nova.conf [neutron] auth_url = http://controller:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = 111111 service_metadata_proxy = true metadata_proxy_shared_secret = METADATA_SECRET #密码要一致 (10) 创建网络服务初始化脚本链接
[root@controller ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini (11) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head" neutron (12) 重启nova的API服务
[root@controller ~]# systemctl restart openstack-nova-api.service (13) 启动neutron服务并设置开机自启
[root@controller ~]# systemctl enable --now neutron-server.service neutron-linuxbridge-agent.service neutron-dhcp-agent.service neutron-metadata-agent.service neutron-l3-agent.service 计算节点私有网络
(1) 安装neutron软件包
[root@compute ~]# dnf install -y openstack-neutron-linuxbridge ebtables ipset (2) 编辑neutron配置文件
#复制备份配置文件并去掉注释 [root@compute ~]# cp /etc/neutron/neutron.conf /etc/neutron/neutron.conf.bak [root@compute ~]# grep -Ev '^$|#' /etc/neutron/neutron.conf.bak >/etc/neutron/neutron.conf #编辑 [root@compute ~]# vim /etc/neutron/neutron.conf [DEFAULT] transport_url = rabbit://openstack:111111@controller auth_strategy = keystone [keystone_authtoken] www_authenticate_uri = http://controller:5000 auth_url = http://controller:5000 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = 111111 [oslo_concurrency] lock_path = /var/lib/neutron/tmp (3) 配置Linux网桥代理
#复制备份配置文件并去掉注释 [root@compute ~]# cp /etc/neutron/plugins/ml2/linuxbridge_agent.ini /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak [root@compute ~]# grep -Ev '^$|#' /etc/neutron/plugins/ml2/linuxbridge_agent.ini.bak > /etc/neutron/plugins/ml2/linuxbridge_agent.ini #编辑 [root@controller ~]# vim /etc/neutron/plugins/ml2/linuxbridge_agent.ini [linux_bridge] physical_interface_mappings = provider:ens34 #这里选择提供给实例的net网卡 [vxlan] enable_vxlan = true local_ip = 10.10.10.20 l2_population = true [securitygroup] enable_security_group = true firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver (4) 设置网桥过滤器
#修改系统参数配置文件 [root@compute ~]# echo 'net.bridge.bridge-nf-call-iptables = 1 net.bridge.bridge-nf-call-ip6tables = 1' >> /etc/sysctl.conf #加载br_netfilter模块 [root@compute ~]# modprobe br_netfilter #检查 [root@compute ~]# sysctl -p net.bridge.bridge-nf-call-iptables = 1 #出现这个则配置成功 net.bridge.bridge-nf-call-ip6tables = 1 #出现这个则配置成功 (5) 配置计算服务以使用网络服务
#在[neutron]部分，配置访问参数，启用元数据代理 [root@compute ~]# vim /etc/nova/nova.conf [neutron] auth_url = http://controller:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = 111111 (6) 重启nova的API服务
[root@compute ~]# systemctl restart openstack-nova-api.service (7) 启动Linux网桥服务并设置开机自启
[root@compute ~]# systemctl enable neutron-linuxbridge-agent.service 私有网络服务是否正常运行
(8) 控制节点查看网络代理服务列表
#控制节点查看网络代理服务列表 [root@controller ~]# openstack network agent list #一般成功后会出现Metadata agent，DHCP agent,L3 agent,两个Linux bridge agent一共五个代理，一个Linux bridge agent属于controlller,另一个属于compute Dashboard仪表盘
(1) 安装dashboard软件包
[root@controller ~]# dnf install -y openstack-dashboard (2) 编辑dashboard配置文件
#此文件内所有选项与参数用命令模式搜索，有就修改，没有就添加 [root@controller ~]# vim /etc/openstack-dashboard/local_settings OPENSTACK_HOST = "controller" #不配域名解析就要把IP写进去 ALLOWED_HOSTS = ['controller'，'compute','10.10.10.10','10.10.10.20'] SESSION_ENGINE = 'django.contrib.sessions.backends.cache' CACHES = { 'default': { 'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache', 'LOCATION': 'controller:11211', }, } OPENSTACK_KEYSTONE_URL = "http://%s/identity/v3" % OPENSTACK_HOST OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = True OPENSTACK_API_VERSIONS = { "identity": 3, "image": 2, "volume": 3, } OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = "Default" OPENSTACK_KEYSTONE_DEFAULT_ROLE = "user" OPENSTACK_NEUTRON_NETWORK = { 'enable_router': False, 'enable_quotas': False, 'enable_distributed_router': False, 'enable_ha_router': False, 'enable_lb': False, 'enable_firewall': False, 'enable_vpn': False, 'enable_fip_topology_check': False, } TIME_ZONE = "Asia/Shanghai" (3) 配置http服务
[root@controller ~]# vi /etc/httpd/conf.d/openstack-dashboard.conf WSGIApplicationGroup %{GLOBAL} #添加这行 #编辑dashboard配置文件 [root@controller ~]# vim /etc/openstack-dashboard/local_settings WEBROOT = '/dashboard/' #添加这行 (4) 重启http和缓存服务
[root@controller ~]# systemctl restart httpd.service memcached.service (5) 登录web界面
#如果不配置域名解析，就直接用ip http://10.10.10.10/dashboard #如果要配置域名解析，在电脑C:WindowsSystem32driversetc目录下里面的hosts文件里添加 10.10.10.10 controller 10.10.10.20 compute #再访问 http://controller/dashboard Cinder存储
控制节点
(1) 数据库创库授权
#进入数据库 [root@controller ~]# mysql -u root -p111111 #创建cinder数据库 MariaDB [(none)] CREATE DATABASE cinder; #授权 MariaDB [(none)]> GRANT ALL PRIVILEGES ON cinder.* TO 'cinder'@'localhost' IDENTIFIED BY '111111'; MariaDB [(none)]> GRANT ALL PRIVILEGES ON cinder.* TO 'cinder'@'%' IDENTIFIED BY '111111'; (2) 编辑配置文件
#复制一份去掉注释 [root@controller ~]# cp /etc/cinder/cinder.conf /etc/cinder/cinder.conf.bak [root@controller ~]# grep -Ev '^$|#' /etc/cinder/cinder.conf.bak > /etc/cinder/cinder.conf #编辑 [root@controller ~]# vim /etc/cinder/cinder.conf [DEFAULT] transport_url = rabbit://openstack:111111@controller auth_strategy = keystone my_ip = 10.10.10.10 [database] connection = mysql+pymysql://cinder:111111@controller/cinder [keystone_authtoken] www_authenticate_uri = http://controller:5000 auth_url = http://controller:5000 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = cinder password = 111111 [oslo_concurrency] lock_path = /var/lib/cinder/tmp (3) 数据库初始化
[root@controller ~]# su -s /bin/sh -c "cinder-manage db sync" cinder (4) 查看cinder数据库表信息
[root@controller ~]# mysql -uroot -p111111 MariaDB [(none)]> use cinder; MariaDB [cinder]> show tables; MariaDB [cinder]> quit (5) 创建cinder用户和服务，关联admin角色
#创建cinder用户 [root@controller ~]# openstack user create --domain default --password 111111 placement #关联admin角色 [root@controller ~]# openstack role add --project service --user cinder admin #创建cinderv2,cinderv3服务 [root@controller ~]# openstack service create --name cinderv2 > --description "OpenStack Block Storage" volumev2 [root@controller ~]# openstack service create --name cinderv3 > --description "OpenStack Block Storage" volumev3 (6) 注册API接口
cinderv2的服务端点
#public [root@controller ~]# openstack endpoint create --region RegionOne > volumev2 public http://controller:8776/v2/%(project_id)s #internal [root@controller ~]# openstack endpoint create --region RegionOne > volumev2 internal http://controller:8776/v2/%(project_id)s #admin [root@controller ~]# openstack endpoint create --region RegionOne > volumev2 admin http://controller:8776/v2/%(project_id)s cinderv3的服务端点
#public [root@controller ~]# openstack endpoint create --region RegionOne > volumev3 public http://controller:8776/v3/%(project_id)s #internal [root@controller ~]# openstack endpoint create --region RegionOne > volumev3 internal http://controller:8776/v3/%(project_id)s #admin [root@controller ~]# openstack endpoint create --region RegionOne > volumev3 admin http://controller:8776/v3/%(project_id)s (7) 查看服务端点
[root@controller ~]# openstack endpoint list (8) 配置计算服务使用块存储
#编辑nova配置文件 [root@controller cinder]# vi /etc/nova/nova.conf [cinder] os_region_name = RegionOne #重启nova [root@controller ~]# systemctl restart openstack-nova-api.service (9) 启动cinder服务并设置开机自启
[root@controller ~]# systemctl enable --now openstack-cinder-api.service openstack-cinder-scheduler.service 计算节点（关闭虚拟机添加一块50G硬盘）
(1) 查看磁盘
[root@compute ~]# fdisk --list (2) 安装 LVM 包
[root@compute ~]# dnf -y install lvm2 device-mapper-persistent-data (3) 创建 LVM 物理卷/dev/sdb
[root@compute ~]# pvcreate /dev/sdb (4) 创建 LVM 卷组cinder-volumes
[root@compute ~]# vgcreate cinder-volumes /dev/sdb (5) 修改LVM配置
#复制一份去掉注释 [root@compute ~]# cp /etc/lvm/lvm.conf /etc/lvm/lvm.conf.bak [root@compute ~]# grep -Ev '^$|#' /etc/lvm/lvm.conf.bak > /etc/lvm/lvm.conf #编辑 [root@compute ~]# vi /etc/lvm/lvm.conf devices { filter = [ "a/sda/",a/sdb/", "r/.*/"] } (6) 安装cinder相关软件包
[root@compute ~]# dnf install -y openstack-cinder targetcli python3-keystone (7) 编辑cinder配置文件
#复制一份去掉注释 [root@compute ~]# cp /etc/cinder/cinder.conf /etc/cinder/cinder.conf.bak [root@compute ~]# grep -Ev '^$|#' /etc/cinder/cinder.conf.bak > /etc/cinder/cinder.conf #编辑 [root@compute ~]# vim /etc/cinder/cinder.conf [DEFAULT] transport_url = rabbit://openstack:111111@controller auth_strategy = keystone my_ip = 10.10.10.20 enabled_backends = lvm glance_api_servers = http://controller:9292 [database] connection = mysql+pymysql://cinder:111111@controller/cinder [keystone_authtoken] www_authenticate_uri = http://controller:5000 auth_url = http://controller:5000 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = cinder password = 111111 [lvm] #没有就添加 volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver volume_group = cinder-volumes #要与创建的卷组名对应 target_protocol = iscsi target_helper = lioadm [oslo_concurrency] lock_path = /var/lib/cinder/tmp (8) 启动cinder服务并设置开机自启
[root@compute ~]# systemctl enable --now openstack-cinder-volume.service target.service (9) 返回控制节点，查看服务列表
[root@controller ~]# openstack volume service list #显示这样就行 +------------------+-------------+------+---------+-------+----------------------------+ | Binary | Host | Zone | Status | State | Updated At | +------------------+-------------+------+---------+-------+----------------------------+ | cinder-scheduler | controller | nova | enabled | up | 2023-05-11T08:12:03.000000 | | cinder-volume | compute@lvm | nova | enabled | up | 2023-05-11T08:12:02.000000 | +------------------+-------------+------+---------+-------+----------------------------+ 至此，openstack云平台搭建V版已全部完成
![洛谷 P11345 [KTSC 2023 R2] 基地简化 题解](http://www.itfaba.com/wp-content/themes/kemi/timthumb.php?src=http://www.itfaba.com/wp-content/themes/kemi/img/random/1.jpg&w=218&h=124&zc=1)
