畸变矫正、透视变换加速(OpenCV C++)

前两周，同事和我说检测时间超时，其中对图像做畸变矫正和投影变换就要花费25ms（3000×3000的图）。而此时我们已经用上了文章opencv图像畸变矫正加速、透视变换加速方法总结中的方法。突然我想到了我去年笔记OpenCV笔记（10） 相机模型与标定中的一个函数cv::undistortPoints()，对感兴趣点进行畸变矫正。在应用之前，需要测试下两种方法计算出来的点的差值，即remap和undistortPoints的不同。结论：对全图进行畸变矫正，再找点 VS 找点后，对点进行畸变矫正，两者的差值小于0.1个像素，可行！同样的方法可以运用在投影变换上。在尺寸测量方面，这样可以节省掉畸变矫正和投影变换的时间。

1 只对感兴趣的点进行畸变矫正

// 读取相机参数文件 FileStorage fs("D:/distortionLens.xml", FileStorage::READ); Mat intrinsic_matrix = Mat(3, 3, CV_32FC1, Scalar::all(0)); Mat distortion_coeffs = Mat(1, 5, CV_32FC1, Scalar::all(0)); fs["intrinsic_matrix"] >> intrinsic_matrix; fs["distortion_coeffs"] >> distortion_coeffs; Mat mapx = Mat(s, CV_32FC1); Mat mapy = Mat(s, CV_32FC1); // 根据内参和畸变系数，建立查找表 //intrinsic_matrix = getOptimalNewCameraMatrix(intrinsic_matrix, distortion_coeffs, s, 1, s, 0); initUndistortRectifyMap(intrinsic_matrix, distortion_coeffs, Mat(), intrinsic_matrix, s, CV_32FC1, mapx, mapy); // 方法1：畸变矫正后找角点 Mat distortionMat; remap(src, distortionMat, mapx, mapy, INTER_CUBIC); vector<Point2f> distortPoints; findChessboardCornersSB(src, Size(21, 21), distortPoints, 64); // 方法2：找角点后畸变矫正 vector<Point2f> oriPoints, sparsePoints; findChessboardCornersSB(src, Size(21, 21), oriPoints, 64); undistortPoints(oriPoints, sparsePoints, intrinsic_matrix, distortion_coeffs, Mat(), intrinsic_matrix); // 打印比较 cout << "     原图找角点     " << "t" << "  原图remap后找角点  " << "t" << "  对原图角点矫正  " << endl; for (int i = 0; i < sparsePoints.size(); i++) {     cout << oriPoints[i] << "t" << distortPoints[i] << "t" << sparsePoints[i] << "t" << "差值：" << distortPoints[i] - sparsePoints[i] << endl; } 

部分数据如下所示，可以看出，两者差值小于0.1个像素，加速10ms完成，接下来再对投影变换加速一下。

2 只对感兴趣的点进行投影变换

// 读取变换矩阵 fs = FileStorage("D:/transMat.txt", FileStorage::READ); Mat transMat = Mat(3, 3, CV_32FC1, Scalar::all(0)); fs["transMat"] >> transMat; 	 // 方法1：进行透视变换后找角点 Mat warpMat; warpPerspective(src, warpMat, transMat, s, INTER_LINEAR, BORDER_CONSTANT, Scalar(255)); vector<Point2f> warpPoints; findChessboardCornersSB(warpMat,Size(21, 21), warpPoints, 64); // 方法2：找角点后进行透视变换 vector<Point2f> outPoints; for (int i = 0; i < oriPoints.size(); i++) { 	Mat_<double> oriPoint(3, 1); 	oriPoint(0, 0) = oriPoints[i].x; 	oriPoint(1, 0) = oriPoints[i].y; 	oriPoint(2, 0) = 1; 	Mat dstPoints = transMat * oriPoint; 	double a1 = dstPoints.at<double>(0, 0); 	double a2 = dstPoints.at<double>(1, 0); 	double a3 = dstPoints.at<double>(2, 0); 	outPoints.push_back(Point2f(a1 * 1.0 / a3, a2 * 1.0 / a3)); }
//打印 cout << "     原图找角点     " << "t" << "  原图透视变换后找角点  " << "t" << "  对原图角点变换  " << endl; for (int i = 0; i < sparsePoints.size(); i++) { 	cout << oriPoints[i] << "t" << warpPoints[i] << "t" << outPoints[i] << "t" << "差值：" << distortPoints[i] - sparsePoints[i] << endl; } 

 

3 合并

3.1 读取文件

void GetMap() { 	FileStorage fs(path+"distortionLens.xml", FileStorage::READ); 	if (fs.isOpened()) 	{ 		intrinsic_matrix = Mat(3, 3, CV_64FC1, Scalar::all(0)); 		distortion_coeffs = Mat(1, 5, CV_64FC1, Scalar::all(0)); 		fs["intrinsic_matrix"] >> intrinsic_matrix; 		fs["distortion_coeffs"] >> distortion_coeffs; 	} 	fs = FileStorage(path+"transMat.txt", FileStorage::READ); 	if (fs.isOpened()) 	{ 		transMat = Mat(3, 3, CV_64FC1, Scalar::all(0)); 		fs["transMat"] >> transMat; 	} }

3.2 变换感兴趣点

void remapPoints(vector<Point2f>& points) { 	for (int i = 0; i < points.size(); i++) { 		Mat_<double> oriPoint(3, 1); 		oriPoint(0, 0) = points[i].x; 		oriPoint(1, 0) = points[i].y; 		oriPoint(2, 0) = 1; 		Mat dstPoint = transMat * oriPoint; 		double a1 = dstPoint.at<double>(0, 0); 		double a2 = dstPoint.at<double>(1, 0); 		double a3 = dstPoint.at<double>(2, 0); 		points[i] = Point2f(a1 * 1.0 / a3, a2 * 1.0 / a3); 	} 	undistortPoints(points, points, intrinsic_matrix, distortion_coeffs, Mat(), intrinsic_matrix);  }